Professional Plumbing Services

Expert Piping and Repiping Services Near You

Pipes don’t last forever. Even well-built plumbing starts to show its age after enough years. That’s why Providence Plumbing & Restoration provides piping and repiping for homes, apartment communities, HOAs, and commercial buildings across the Charlotte metro. You might need a single pipe repair or a full replacement of your plumbing system. Either way, our experienced team will help you find the right fix and minimize disruption along the way.

80+
Years Combined Experience
4.9
Rating
24/7
Emergency Service
2hr
Rapid Response Guarantee
Is It Time?

Signs Your Property Needs Repiping

Pipes usually fail slowly. The warning signs are easy to brush off as one-time problems. When they start adding up, it’s often a sign that your plumbing system is wearing out. Watch for these signs:

What We Do

Our Piping and Repiping Services

Our repiping services cover everything from a single leaking joint to an entire building. We work on residential, multi-family, and commercial properties. Our services include:

Leak Detection and Pipe Repair

Some leaks are easy to spot. Others hide behind walls, under floors, or beneath a concrete slab. We use modern leak detection tools to find the source, then complete the pipe repair, whether that means replacing a worn fitting, tightening a loose one, or swapping out a damaged section of pipe.

Partial Repipe

A partial repipe targets the parts of your plumbing that keep giving you trouble. It’s a smart option when one area of a home or building has ongoing issues, but the rest of the pipes still have plenty of life left. You get a lasting solution for the problem area without paying to replace pipes that are working fine.

Whole-House and Whole-Building Repiping

When pipes are failing throughout a property, whole-house repiping replaces the entire system of old supply lines and pipe fittings with new ones from start to finish. Home repiping gives homeowners steadier water pressure and fewer repair calls. For apartment buildings and commercial spaces, full repiping can put an end to constant service calls and surprise leaks.

Galvanized and Polybutylene Pipe Replacement

Galvanized steel pipes corrode from the inside out. Over time, that leads to rust, clogs, and weak water pressure. If clogs keep coming back, drain cleaning may only be a short-term fix. Polybutylene pipes were popular for years, but they’re known to crack and leak without warning. For both materials, pipe replacement is the most reliable long-term fix. Repiping replaces the failing lines before they cause damage.

Water Line and Supply Piping

Your main water line brings water into your property, and supply pipes carry it to every fixture. We handle pipe repair and pipe replacement for both to protect your water quality and make sure clean water reaches every sink, shower, and appliance. If the fixture is the culprit, our faucet repair service can fix drips, leaks, and weak flow at sinks and showers, so you don’t pay for pipe work you don’t need.

Drain, Waste, and Vent Piping

Old cast iron drain pipes can crack, rust, and eventually collapse. The same goes for the sewer line that carries waste away from your property. We handle drain and sewer line repair, from fixing a single damaged section to replacing the entire line when it’s beyond repair. We also offer drain cleaning and camera inspections to catch problems early, before they turn into backups.

Licensed professional plumber at work
Pipe Materials

Choosing the Right Pipe Material

The right pipe material depends on several things:

  • Your building
  • How much water you use
  • Local code
  • Your budget

Our plumbers will walk you through your options and help you choose what works best for your property. The most common choices are:

  • PEX (cross-linked polyethylene): PEX is flexible plastic tubing that can bend around corners. Because it bends, it needs fewer pipe fittings, which means fewer spots where leaks can start. It also holds up well in cold weather and is less likely to burst if it freezes. PEX is a popular choice for home repiping because it can often be run through walls with less cutting and patching, so the job is faster and less messy.
  • Copper: Copper has been used in plumbing for decades because it’s strong and long-lasting. It holds up well to heat and pressure, which makes it a solid choice for supply lines in homes and commercial buildings alike. Copper usually takes more time to install than PEX, but many property owners like it for its proven track record.
  • CPVC (chlorinated polyvinyl chloride): CPVC is a rigid plastic pipe that won’t rust or corrode like metal pipes can. It handles both hot and cold water, so it works well for the lines that feed your sinks, showers, and water heater. It’s also lightweight, and its pipe fittings are easy to work with, which can help keep a project on schedule.
  • PVC (polyvinyl chloride) and cast iron: These pipes carry water away from your property rather than bringing clean water in. You’ll find them in drain, waste, and vent lines. PVC is lightweight and resists buildup. Cast iron is heavy and very quiet, which is why it’s often used in larger buildings where the sound of draining water matters.

Not sure which one is right for you? We’ll look at your building, how much water you use, local code requirements, and your budget, then recommend the best pipe for your plumbing system.

Our Repiping Process

01

Call us or fill out our online form

Tell us what’s going on, and we’ll ask a few quick questions about your property.

02

On-site inspection

Our plumber checks your pipes, including their type, condition, and layout, to decide whether pipe repair or repiping makes sense. For drain lines, we may use a camera inspection to see inside.

03

Written estimate

Before any work begins, you’ll get a clear estimate. It covers the scope of work, the recommended pipe material, the timeline, and the cost.

04

Scheduling and prep

We plan water shutoffs around your schedule. For occupied buildings, we help coordinate notices for tenants or staff.

05

Repiping

Our team removes or bypasses the old pipes and installs the new ones. Then we test the entire plumbing system to make sure every connection holds.

06

Final walkthrough

We review the finished work with you and answer any questions. Every job is backed by our workmanship guarantee.

Plumbing & Restoration

When Old Pipes Cause Water Damage, We Handle Both

A slow leak from a failing pipe can soak into drywall, warp floors, and stain ceilings. If it’s left alone, the moisture can lead to mold that affects your indoor air quality and your health. Since we’re both a plumbing and restoration company, our IICRC-certified technicians can dry out and clean up water damage once the pipe repair or repiping is done.

You can skip hiring a second company and coordinating between vendors. Property managers, HOAs, and business owners get one point of contact and less time spent dealing with the problem.

Trusted Local Team

Why Charlotte Property Owners Choose Providence Plumbing & Restoration

When you invite a plumber into your home or building, you want to know you can trust them. Here’s what our customers can count on:

Service Area

Piping and Repiping Across the Charlotte Metro

We provide piping and repiping throughout Mecklenburg, Cabarrus, and Union counties. That includes Charlotte, Concord, Huntersville, Matthews, Indian Trail, Monroe, Mooresville, Kannapolis, Mint Hill, Waxhaw, Weddington, Cornelius, Davidson, and Harrisburg. If you’re nearby and don’t see your town listed, give us a call or reach out through our online form.

Get a Lasting Solution for Your Pipes

Don’t wait for the next leak to turn into a bigger problem. Call Providence Plumbing & Restoration or fill out our online form to schedule an inspection and get a written estimate. We’ll help you find a lasting solution for your plumbing system, whether you need a quick pipe repair or a full repipe.

Frequently Asked Questions

How do I know if I need a pipe repair or full repiping?

If the problem is in one spot and the rest of your pipes are healthy, a pipe repair is usually enough. If one area keeps failing, a partial repipe is the next step. Repiping may be the better choice if you have repeated leaks, rusty water, clogs that return after drain cleaning, or old galvanized or polybutylene pipes. We’ll inspect your plumbing system and tell you whether pipe repair will hold or repiping is the smarter move.

It depends on the size of the property, the pipe material, and how easy it is to reach the pipes. A partial repipe takes less time than a full building, since repiping replaces only the sections that need it. Your written estimate will include a timeline.

Yes. We use phased scheduling, planned water shutoffs, and flexible work hours to minimize disruption for tenants, staff, and customers while we work.

PEX and copper are the most common choices for supply lines. The best option depends on your building, your budget, and local code. We’ll walk you through the pros and cons of each.

Cost depends on the size of the job, the materials, and how easy the pipes are to reach. We provide a written estimate before any work begins, so you know the cost upfront.